Description:
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.The primary purpose of this position is to provide full performance level work in constructing, installing, repairing, and modifying wood and wood substitute structures and items requiring close tolerance fit and structural soundness, and performing the full range of painting, including surface preparation, blending and matching paints, and coating of various surfaces.
Requirements:
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700, General Maintenance & Operations. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of the position without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of carpentry methods and techniques, and precision carpentry equipment.
2. Knowledge of safety regulations, practices, and procedures; regulations, procedures, and policies related to
records maintenance and documentation; and current federal, state, and local regulations pertaining to hazardous
waste management.
3. Knowledge of advanced shop mathematics to plan, compute, and lay out more complex and exact projects.
4. Knowledge of the methods and procedures involved in the installation of new roofing materials and the repair of
leaky roofing, accepted surface preparation and coating methods and techniques including special finishing
techniques; and paints and thinning additives.
5. Skill in using, setting-up, operating, and maintaining a variety of painting, roofing, and woodworking power and
hand tools/equipment; constructing, installing, repairing, and modifying wood structures; producing finished
products with precise fits, accurate dimensions, and acceptable appearance; and tinting, toning, matching, and
blending coating materials.
6. Ability to interpret complex instructions, sketches, blueprints, and building codes; and read and apply directions
that relate to the mixture, use, and application of various kinds of coating materials, solvents, and precoating agents.
Physical Effort
Uses hand and power tools and equipment that may require standing and holding tools in uncomfortable positions for
extended periods. The work requires considerable bending, kneeling, and stooping. On-site work typically requires
crawling, climbing on ladders, scaffolds, and roof tops. The work may be at extreme heights (such as water towers
or tall buildings). Strenuous physical exertion is sometimes required when handling heavy and bulky materials such
as sheets of plywood and other construction materials. May lift and move materials up to 40 pounds, unassisted, and
occasionally lift or move heavier items with the assistance of lifting devices or other workers. Frequently requires
lifting up to 100 pounds while carrying rolls of roofing felt, shingles, and asphalt.
Working Conditions
Works inside shops and outside at job sites. In shops, is exposed to moderate or high noise levels from operating
machinery, sawdust in the air, fumes, and hazards associated with carpentry, painting, and roofing trades. At job
sites, may be exposed to weather conditions and hazards of working on and around scaffolds and ladders and are
subject to cuts, bruises, and contusions; may occasionally be exposed to the possibility of broken bones. May work
in confined areas, such as crawl spaces and attics that may be dusty and dirty. Working with asphalt results in
exposure to unusually dirty conditions (permanent damage to clothes and shoes) and burns from hot asphalt. Uses
protective devices, such as ear plugs, safety glasses, respirators, safety shoes, hard hats, coveralls, gloves, rain gear,
and other protective gear are required, which are sometimes heavy and uncomfortable.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Mar 22, 2024;
from:
usajobs.gov